Constitutional Studies That Can Be Used in Three Dimensional Ceramic Printers Working with Fusion Deposition Modelling Technique

Efe Türkel; Pınar Çalışkan Güneş

Article Details

Constitutional Studies That Can Be Used in Three Dimensional Ceramic Printers Working with Fusion Deposition Modelling Technique

Authors:

Efe Türkel | Pınar Çalışkan Güneş

Publisher:

Dokuz Eylul University

Journal:

Yedi Issue 29, pp.1-12

Document Type:

Article

Publication Date:

1/2023

Document Language:

Turkish

Document ID (Org No.):

2001281212

pISSN:

1307-9840

Keywords:

Abstract:

 Three-dimensional printer technology continues to progress by leaps and bounds with different types of materials in a wide range from the food to health sector, from the defense industry to architecture. Innovative examples and techniques have emerged with the use of printers in most of the art and design disciplines. Along this innovative approach, ceramic material has become one of the materials used in three-dimensional printers. This study was carried out as a TÜBİTAK 1002 project and as a part of the project titled Constitutional Studies That Can Be Used in Three Dimensional Ceramic Printers Working with Fusion Deposition Modelling Technique approved by TÜBİTAK-MAM. Fused Deposition Modeling printers in ceramics have been developing technically and structurally in parallel with the increase in user interest in the last ten years. The slurry used in these printers can also be made by preparing the clays in certain densities that can be bought from the market or by preparing new bodies created with different raw materials and clays. Scientific goals to be reached in the study; to develop ceramic slurries that can be consolidated at low degrees to be used in three-dimensional printers with local raw materials, to reduce the costs for the area by developing products regardless of the by-products used in the shaping process in the ceramic industry and to offer development suggestions that can be made in the structure of these clays. In the research, body recipes specially prepared for three-dimensional ceramic printers were created using quantitative and experimental methods and applied on three-dimensional forms.

 Three-dimensional printer technology continues to progress by leaps and bounds with different types of materials in a wide range from the food to health sector, from the defense industry to architecture. Innovative examples and techniques have emerged with the use of printers in most of the art and design disciplines. Along this innovative approach, ceramic material has become one of the materials used in three-dimensional printers. This study was carried out as a TÜBİTAK 1002 project and as a part of the project titled Constitutional Studies That Can Be Used in Three Dimensional Ceramic Printers Working with Fusion Deposition Modelling Technique approved by TÜBİTAK-MAM. Fused Deposition Modeling printers in ceramics have been developing technically and structurally in parallel with the increase in user interest in the last ten years. The slurry used in these printers can also be made by preparing the clays in certain densities that can be bought from the market or by preparing new bodies created with different raw materials and clays. Scientific goals to be reached in the study; to develop ceramic slurries that can be consolidated at low degrees to be used in three-dimensional printers with local raw materials, to reduce the costs for the area by developing products regardless of the by-products used in the shaping process in the ceramic industry and to offer development suggestions that can be made in the structure of these clays. In the research, body recipes specially prepared for three-dimensional ceramic printers were created using quantitative and experimental methods and applied on three-dimensional forms.

 Three-dimensional printer technology continues to progress by leaps and bounds with different types of materials in a wide range from the food to health sector, from the defense industry to architecture. Innovative examples and techniques have emerged with the use of printers in most of the art and design disciplines. Along this innovative approach, ceramic material has become one of the materials used in three-dimensional printers. This study was carried out as a TÜBİTAK 1002 project and as a part of the project titled Constitutional Studies That Can Be Used in Three Dimensional Ceramic Printers Working with Fusion Deposition Modelling Technique approved by TÜBİTAK-MAM. Fused Deposition Modeling printers in ceramics have been developing technically and structurally in parallel with the increase in user interest in the last ten years. The slurry used in these printers can also be made by preparing the clays in certain densities that can be bought from the market or by preparing new bodies created with different raw materials and clays. Scientific goals to be reached in the study; to develop ceramic slurries that can be consolidated at low degrees to be used in three-dimensional printers with local raw materials, to reduce the costs for the area by developing products regardless of the by-products used in the shaping process in the ceramic industry and to offer development suggestions that can be made in the structure of these clays. In the research, body recipes specially prepared for three-dimensional ceramic printers were created using quantitative and experimental methods and applied on three-dimensional forms.

 Üç boyutlu yazıcı teknolojisi gıdadan sağlık sektörüne, savunma sanayiinden mimariye varacak kadar geniş bir yelpaze içinde farklı malzeme türleriyle gelişimini hızla sürdürmektedir. Yazıcıların sanat tasarım disiplinlerinin çoğunda kullanılmaya başlanmasıyla yenilikçi örnek ve teknikler ortaya çıkmıştır. Seramik malzeme de bu yenilikçi yaklaşımla üç boyutlu yazıcılarda kullanılan malzemeler arasına girmiştir. Bu çalışma, TÜBİTAK 1002 projesi olarak yapılmış ve TÜBİTAK-MAM tarafından onaylanmış olan Harç Yığma Tekniği İle Çalışan Üç Boyutlu Seramik Yazıcılarda Kullanılabilecek Bünye Araştırmaları başlıklı projenin bir parçası olarak gerçekleştirilmiştir. Harç yığma tekniğiyle çalışan seramik yazıcılar, son on yılda kullanıcı ilgisinin artmasıyla da paralel olarak teknik ve yapısal olarak gelişim göstermektedir. Bu yazıcılarda kullanılan çamurlar gerek piyasadan hazır olarak satın alınabilen çamurların belirli yoğunluklarda hazırlanmasıyla, gerekse farklı hammadde ve killerle oluşturulan yeni bünyelerin hazırlanmasıyla da gerçekleştirilebilir. Çalışmada ulaşılmak istenen bilimsel hedef; yerel hammaddelerle üç boyutlu yazıcılarda kullanılmak üzere, düşük derecelerde pekişebilen seramik çamurları geliştirmek, seramik sanayinde şekillendirme aşamasında kullanılan yan ürünlere bağlı kalmaksızın ürün geliştirerek alana yönelik maliyetleri azaltmak ve bu çamurların fiziki yapılarına yönelik geliştirme önerilerini sunmaktır. Araştırmada nicel ve deneysel yöntem kullanılarak üç boyutlu seramik yazıcılar için özel hazırlanmış bünye reçeteleri oluşturulmuş ve üç boyutlu formlar üzerinde uygulanmıştır.

Article Details

Constitutional Studies That Can Be Used in Three Dimensional Ceramic Printers Working with Fusion Deposition Modelling Technique

Authors:

Efe Türkel | Pınar Çalışkan Güneş

Publisher:

Dokuz Eylul University

Journal:

Yedi Issue 29, pp.1-12

Document Type:

Article

Publication Date:

1/2023

Document Language:

Turkish

Document ID (Org No.):

2001281212

pISSN:

1307-9840

Ceramic

three dimensional printers

fused deposition modeling

design

Seramik

Üç Boyutlu Yazıcılar

Harç Yığma Tekniği

Tasarım

Issues

Article Details

Authors: Efe Türkel | Pınar Çalışkan Güneş

Publisher: Dokuz Eylul University

Journal: Yedi Issue 29, pp.1-12

Document Type: Article

Publication Date: 1/2023

Document Language: Turkish

Document ID (Org No.): 2001281212

pISSN: 1307-9840

Issues

Authors:

Efe Türkel | Pınar Çalışkan Güneş

Publisher:

Dokuz Eylul University

Journal:

Yedi Issue 29, pp.1-12

Document Type:

Article

Publication Date:

1/2023

Document Language:

Turkish

Document ID (Org No.):

2001281212

pISSN:

1307-9840