THE EFFECTS OF OE-ROTOR SPINNING PARAMETERS ON YARN PROPERTIES PRODUCED FROM RECYCLED/VIRGIN COTTON FIBERS BLEND

Hüseyin Okandan; Nida Yıldırım; Mehmet Kertmen; Hüseyin Türksoy

Article Details

THE EFFECTS OF OE-ROTOR SPINNING PARAMETERS ON YARN PROPERTIES PRODUCED FROM RECYCLED/VIRGIN COTTON FIBERS BLEND

Authors:

Hüseyin Okandan | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Publisher:

Bursa Uludağ University

Main Topics:

Mühendislik

Journal:

Uluslararası Bilim Teknoloji ve Tasarım Dergisi Vol.4 Issue 1, pp.1-15

Document Type:

Article

Publication Date:

4/2023

Document Language:

English

Document ID (Org No.):

2001293089

pISSN:

2757-8127

Keywords:

Abstract:

 The environmental load problem of the cotton fiber such as amount of water and pesticides used in the agricultural sector, the main raw material of the textile and apparel industry, obligates the extension of the fibers life cycle. In order to ensure the sustainability of resources, efficient use of natural supplies and evaluation of recyclable wastes are required. However information lacking is the one of barriers in recycling and processing of cotton. In this study, open-end rotor yarns OE-Rotor were spun from the blends of recycled cotton fibers obtained from pre-consumer cotton products r-CO and the virgin cotton C fibers with 5050  ratios. The effects of production parameters rotor type, navel type and torque type on yarn properties were examined. According to the results the effect of the production parameters on all measured yarn properties except tenacity values, is statistically significant. It was concluded that 5050 r-COC open-end rotor yarn samples producing by rotor type with narrowest groove, spiral navel type without notch and green torque type without twist stopping effect, led to lower unevenness, hairiness, IPI and higher breaking elongation.

 The environmental load problem of the cotton fiber such as amount of water and pesticides used in the agricultural sector, the main raw material of the textile and apparel industry, obligates the extension of the fibers life cycle. In order to ensure the sustainability of resources, efficient use of natural supplies and evaluation of recyclable wastes are required. However information lacking is the one of barriers in recycling and processing of cotton. In this study, open-end rotor yarns OE-Rotor were spun from the blends of recycled cotton fibers obtained from pre-consumer cotton products r-CO and the virgin cotton C fibers with 5050  ratios. The effects of production parameters rotor type, navel type and torque type on yarn properties were examined. According to the results the effect of the production parameters on all measured yarn properties except tenacity values, is statistically significant. It was concluded that 5050 r-COC open-end rotor yarn samples producing by rotor type with narrowest groove, spiral navel type without notch and green torque type without twist stopping effect, led to lower unevenness, hairiness, IPI and higher breaking elongation.

 The environmental load problem of the cotton fiber such as amount of water and pesticides used in the agricultural sector, the main raw material of the textile and apparel industry, obligates the extension of the fibers life cycle. In order to ensure the sustainability of resources, efficient use of natural supplies and evaluation of recyclable wastes are required. However information lacking is the one of barriers in recycling and processing of cotton. In this study, open-end rotor yarns OE-Rotor were spun from the blends of recycled cotton fibers obtained from pre-consumer cotton products r-CO and the virgin cotton C fibers with 5050  ratios. The effects of production parameters rotor type, navel type and torque type on yarn properties were examined. According to the results the effect of the production parameters on all measured yarn properties except tenacity values, is statistically significant. It was concluded that 5050 r-COC open-end rotor yarn samples producing by rotor type with narrowest groove, spiral navel type without notch and green torque type without twist stopping effect, led to lower unevenness, hairiness, IPI and higher breaking elongation.

 Tekstil ve konfeksiyon sektörünün ana hammaddesi olan pamuk lifinin çevresel yük sorunu, lifin yaşam döngüsünün uzamasını zorunlu kılmaktadır. Ancak bilgi eksikliği, pamuğun geri dönüşümü ve işlenmesindeki engellerden biridir. Bu çalışmada, tüketim öncesi pamuk ürünlerinden r-CO elde edilen geri dönüştürülmüş pamuk lifleri ile işlenmemiş pamuk C liflerinin 5050 oranlarında karışımlarından Open-end rotor iplikleri OE-Rotor eğrilmiştir. Üretim parametrelerinin rotor tipi, navel tipi ve tork tipi iplik özelliklerine etkileri incelenmiştir. Elde edilen sonuçlara göre, üretim parametrelerinin mukavemet değerleri dışında ölçülen tüm iplik özellikleri üzerindeki etkisi istatistiksel olarak anlamlıdır. En dar yivli rotor tipi, çentiksiz spiral navel tipi ve büküm durdurma etkisi olmayan yeşil tork tipi ile üretilen 5050 r-COC open-end rotor iplik numunelerinin daha düşük düzgünsüzlük, tüylülük, IPI ve daha yüksek kopma uzaması değerleri gösterdiği tespit edilmiştir.

Article Details

THE EFFECTS OF OE-ROTOR SPINNING PARAMETERS ON YARN PROPERTIES PRODUCED FROM RECYCLED/VIRGIN COTTON FIBERS BLEND

Authors:

Hüseyin Okandan | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Publisher:

Bursa Uludağ University

Main Topics:

Mühendislik

Journal:

Uluslararası Bilim Teknoloji ve Tasarım Dergisi Vol.4 Issue 1, pp.1-15

Document Type:

Article

Publication Date:

4/2023

Document Language:

English

Document ID (Org No.):

2001293089

pISSN:

2757-8127

Pre-Consumer Textile Waste

Virgin Cotton

Recycled Cotton

Open-End Rotor YarnTüketici Öncesi Tekstil Atıkları

Pamuk

Geri Dönüşüm Pamuk

Open-End Rotor İplik

Issues

Article Details

Authors: Hüseyin Okandan | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Publisher: Bursa Uludağ University

Main Topics: Mühendislik

Journal: Uluslararası Bilim Teknoloji ve Tasarım Dergisi Vol.4 Issue 1, pp.1-15

Document Type: Article

Publication Date: 4/2023

Document Language: English

Document ID (Org No.): 2001293089

pISSN: 2757-8127

Issues

Authors:

Hüseyin Okandan | Nida Yıldırım | Mehmet Kertmen | Hüseyin Türksoy

Publisher:

Bursa Uludağ University

Main Topics:

Mühendislik

Journal:

Uluslararası Bilim Teknoloji ve Tasarım Dergisi Vol.4 Issue 1, pp.1-15

Document Type:

Article

Publication Date:

4/2023

Document Language:

English

Document ID (Org No.):

2001293089

pISSN:

2757-8127