Evaluation of color stability of bulk-fill restorative materials with different properties

Özge Çeliksöz; Hatice Tepe; Batucan Yaman

Article Details

Evaluation of color stability of bulk-fill restorative materials with different properties

Authors:

Özge Çeliksöz | Hatice Tepe | Batucan Yaman

Publisher:

MediHealth Academy Yayıncılık

Main Topics:

Restoratif Diş Tedavisi

Journal:

Journal of Health Sciences and Medicine Vol.6 Issue 6, pp.1360-1365

Document Type:

Article

Publication Date:

10/2023

Document Language:

English

Document ID (Org No.):

2001303032

pISSN:

2636-8579

Keywords:

Abstract:

 Aims: The present study aims to evaluate the color stability of bulk-fill restorative materials with different properties over different time periods when immersed in a coffee solution. Methods: According to the selected restorative materials, the study groups were formed as follows: CNTlight Alkasite, Cention N, Ivoclar Vivadent, light cure mode, CNTself Alkasite, Cention N, self cure mode EQF Glass hybrid restorative, Equia Forte HT, GC Corporation, AU Single-shade bulk fill, Aura Bulk Fill, SDI, Z550 Filtek Z550, 3M control group. A total of 50 samples n10 were prepared using standard molds 2mmx10mm. After finishing and polishing procedures, all samples were kept in distilled water at 37C for 24 hours. The first color measurement Lab  was performed with Vita Easy Shade V VITA Zahnfabrik. Samples were added to the coffee solution. Color was measured at times simulating 7 days, 1 month, 6 months and 1 year of clinical service. Color changes ΔE1, ΔE2, ΔE3 and ΔE4 were calculated according to the CIE Lab system. Normality of the data was examined by DAgostino  Pearson omnibus normality test. One-way ANOVA analysis and Tukey test were performed. Statistical significance level was set at p 0.05 and statistical analysis software GraphPad Prism 6.0, GraphPad Software, USA was used for the analysis. Results: According to ΔE1 results; clinically unacceptable color change ΔE3.3 values were observed in CNTlight and CNTself groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. According to ΔE2 results; an unacceptable color change ΔE3.3 was observed in all groups except EQF. According to ΔE3 results; an unacceptable color change ΔE3.3 was observed in all groups. According to ΔE4 results; an unacceptable color change ΔE3.3 was observed in all groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. CNTlight group showed the highest color change in all time periods, followed by CNTself group. Conclusion: The color stability of single-shade bulk fill material and glass hybrid restorative materials is similar to the control group. The color stability of alkasite material needs to be improved.

 Aims: The present study aims to evaluate the color stability of bulk-fill restorative materials with different properties over different time periods when immersed in a coffee solution. Methods: According to the selected restorative materials, the study groups were formed as follows: CNTlight Alkasite, Cention N, Ivoclar Vivadent, light cure mode, CNTself Alkasite, Cention N, self cure mode EQF Glass hybrid restorative, Equia Forte HT, GC Corporation, AU Single-shade bulk fill, Aura Bulk Fill, SDI, Z550 Filtek Z550, 3M control group. A total of 50 samples n10 were prepared using standard molds 2mmx10mm. After finishing and polishing procedures, all samples were kept in distilled water at 37C for 24 hours. The first color measurement Lab  was performed with Vita Easy Shade V VITA Zahnfabrik. Samples were added to the coffee solution. Color was measured at times simulating 7 days, 1 month, 6 months and 1 year of clinical service. Color changes ΔE1, ΔE2, ΔE3 and ΔE4 were calculated according to the CIE Lab system. Normality of the data was examined by DAgostino  Pearson omnibus normality test. One-way ANOVA analysis and Tukey test were performed. Statistical significance level was set at p 0.05 and statistical analysis software GraphPad Prism 6.0, GraphPad Software, USA was used for the analysis. Results: According to ΔE1 results; clinically unacceptable color change ΔE3.3 values were observed in CNTlight and CNTself groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. According to ΔE2 results; an unacceptable color change ΔE3.3 was observed in all groups except EQF. According to ΔE3 results; an unacceptable color change ΔE3.3 was observed in all groups. According to ΔE4 results; an unacceptable color change ΔE3.3 was observed in all groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. CNTlight group showed the highest color change in all time periods, followed by CNTself group. Conclusion: The color stability of single-shade bulk fill material and glass hybrid restorative materials is similar to the control group. The color stability of alkasite material needs to be improved.

 Aims: The present study aims to evaluate the color stability of bulk-fill restorative materials with different properties over different time periods when immersed in a coffee solution. Methods: According to the selected restorative materials, the study groups were formed as follows: CNTlight Alkasite, Cention N, Ivoclar Vivadent, light cure mode, CNTself Alkasite, Cention N, self cure mode EQF Glass hybrid restorative, Equia Forte HT, GC Corporation, AU Single-shade bulk fill, Aura Bulk Fill, SDI, Z550 Filtek Z550, 3M control group. A total of 50 samples n10 were prepared using standard molds 2mmx10mm. After finishing and polishing procedures, all samples were kept in distilled water at 37C for 24 hours. The first color measurement Lab  was performed with Vita Easy Shade V VITA Zahnfabrik. Samples were added to the coffee solution. Color was measured at times simulating 7 days, 1 month, 6 months and 1 year of clinical service. Color changes ΔE1, ΔE2, ΔE3 and ΔE4 were calculated according to the CIE Lab system. Normality of the data was examined by DAgostino  Pearson omnibus normality test. One-way ANOVA analysis and Tukey test were performed. Statistical significance level was set at p 0.05 and statistical analysis software GraphPad Prism 6.0, GraphPad Software, USA was used for the analysis. Results: According to ΔE1 results; clinically unacceptable color change ΔE3.3 values were observed in CNTlight and CNTself groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. According to ΔE2 results; an unacceptable color change ΔE3.3 was observed in all groups except EQF. According to ΔE3 results; an unacceptable color change ΔE3.3 was observed in all groups. According to ΔE4 results; an unacceptable color change ΔE3.3 was observed in all groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. CNTlight group showed the highest color change in all time periods, followed by CNTself group. Conclusion: The color stability of single-shade bulk fill material and glass hybrid restorative materials is similar to the control group. The color stability of alkasite material needs to be improved.

 Aims: The present study aims to evaluate the color stability of bulk-fill restorative materials with different properties over different time periods when immersed in a coffee solution. Methods: According to the selected restorative materials, the study groups were formed as follows: CNTlight Alkasite, Cention N, Ivoclar Vivadent, light cure mode, CNTself Alkasite, Cention N, self cure mode EQF Glass hybrid restorative, Equia Forte HT, GC Corporation, AU Single-shade bulk fill, Aura Bulk Fill, SDI, Z550 Filtek Z550, 3M control group. A total of 50 samples n10 were prepared using standard molds 2mmx10mm. After finishing and polishing procedures, all samples were kept in distilled water at 37C for 24 hours. The first color measurement Lab  was performed with Vita Easy Shade V VITA Zahnfabrik. Samples were added to the coffee solution. Color was measured at times simulating 7 days, 1 month, 6 months and 1 year of clinical service. Color changes ΔE1, ΔE2, ΔE3 and ΔE4 were calculated according to the CIE Lab system. Normality of the data was examined by DAgostino  Pearson omnibus normality test. One-way ANOVA analysis and Tukey test were performed. Statistical significance level was set at p 0.05 and statistical analysis software GraphPad Prism 6.0, GraphPad Software, USA was used for the analysis. Results: According to ΔE1 results; clinically unacceptable color change ΔE3.3 values were observed in CNTlight and CNTself groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. According to ΔE2 results; an unacceptable color change ΔE3.3 was observed in all groups except EQF. According to ΔE3 results; an unacceptable color change ΔE3.3 was observed in all groups. According to ΔE4 results; an unacceptable color change ΔE3.3 was observed in all groups. The color change values of EQF, Z550 and AU groups were statistically similar p0.05. CNTlight group showed the highest color change in all time periods, followed by CNTself group. Conclusion: The color stability of single-shade bulk fill material and glass hybrid restorative materials is similar to the control group. The color stability of alkasite material needs to be improved.

Article Details

Evaluation of color stability of bulk-fill restorative materials with different properties

Authors:

Özge Çeliksöz | Hatice Tepe | Batucan Yaman

Publisher:

MediHealth Academy Yayıncılık

Main Topics:

Restoratif Diş Tedavisi

Journal:

Journal of Health Sciences and Medicine Vol.6 Issue 6, pp.1360-1365

Document Type:

Article

Publication Date:

10/2023

Document Language:

English

Document ID (Org No.):

2001303032

pISSN:

2636-8579

Alkasite

Bulk fill

Cention N

Color Stability

Glass Hybrid

Issues

Article Details

Evaluation of color stability of bulk-fill restorative materials with different properties

Authors: Özge Çeliksöz | Hatice Tepe | Batucan Yaman

Publisher: MediHealth Academy Yayıncılık

Main Topics: Restoratif Diş Tedavisi

Journal: Journal of Health Sciences and Medicine Vol.6 Issue 6, pp.1360-1365

Document Type: Article

Publication Date: 10/2023

Document Language: English

Document ID (Org No.): 2001303032

pISSN: 2636-8579

Alkasite

Bulk fill

Cention N

Color Stability

Glass Hybrid

Issues

Authors:

Özge Çeliksöz | Hatice Tepe | Batucan Yaman

Publisher:

MediHealth Academy Yayıncılık

Main Topics:

Restoratif Diş Tedavisi

Journal:

Journal of Health Sciences and Medicine Vol.6 Issue 6, pp.1360-1365

Document Type:

Article

Publication Date:

10/2023

Document Language:

English

Document ID (Org No.):

2001303032

pISSN:

2636-8579