Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method

Neslihan ÖZSOY; Murat ÖZSOY

doi:https://doi.org/10.16984/saufenbilder.466053

Article Details

Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method

Authors:

Neslihan ÖZSOY | Murat ÖZSOY

Main Topics:

Other branches of engineering

Journal:

Sakarya University Journal of Science 2019 Vol.23 Issue 1, pp.113-120

Document Type:

Article

Publication Date:

1/2019

Document Language:

English

Document ID (Org No.):

2000557361

DOI:

https://doi.org/10.16984/saufenbilder.466053

Abstract:

 


Surface
roughness significantly affects the work efficiency and life of machine parts
interacting with each other. There are many parameters that affect surface
roughness such as processed material, cutting tool, cutting parameters, cooling
type. For this reason, optimization of the machining parameters and proper
processing conditions are very important. In this study, the optimum machining
conditions were determined by investigating the surface roughness of the milled
AISI 1040 steel alloy depending on the feed per tooth (0.08 mm/tooth, 0.12
mm/tooth, 0.16 mm/tooth, 0.20 mm/tooth), spindle speed (2000 rpm, 3000 rpm,
40000 rpm, 5000 rpm) and the cooling type (liquid, air) parameters. The Taguchi
experimental design method was used to help achieve results at acceptable
levels and to save time and cost in achieving optimal results. Experiments
designed with the Taguchi method were based on the L16 orthogonal array and
signal / noise (S/N) ratios were used in the evaluation of the experimental
results. The optimum levels of the control factors for minimizing the surface
roughness using S/N rates were determined. The optimal conditions for surface
roughness were observed at A1B1C2 (i.e.,feed per tooth=0.08 mm/tooth and 2000
rpm spindle speed, cooling type=liquid). Variance analysis was also conducted
in the study. According to the results of analyses, it was found that spindle
speed was the most significant parameter for surface roughness. Finally,
confirmation tests were conducted to check the success of the optimization.


.

Article Details

Optimization of Surface Roughness of AISI 1040 Stainless Steel in Milling Process Using Taguchi Method

Authors: Neslihan ÖZSOY | Murat ÖZSOY

Main Topics: Other branches of engineering

Journal: Sakarya University Journal of Science 2019 Vol.23 Issue 1, pp.113-120

Document Type: Article

Publication Date: 1/2019

Document Language: English

Document ID (Org No.): 2000557361

DOI: https://doi.org/10.16984/saufenbilder.466053

Issues

Authors:

Neslihan ÖZSOY | Murat ÖZSOY

Main Topics:

Other branches of engineering

Journal:

Sakarya University Journal of Science 2019 Vol.23 Issue 1, pp.113-120

Document Type:

Article

Publication Date:

1/2019

Document Language:

English

Document ID (Org No.):

2000557361

DOI:

https://doi.org/10.16984/saufenbilder.466053