Mikro Modüllü Dişli-Mil Sıkı Geçme Bağlantılarında Mil Çapı ve Delik Toleransının Gerilme Dağılımına Etkisi

Tuğçe TEZEL

Article Details

Mikro Modüllü Dişli-Mil Sıkı Geçme Bağlantılarında Mil Çapı ve Delik Toleransının Gerilme Dağılımına Etkisi

Authors:

Tuğçe TEZEL

Publisher:

Osman SAĞDIÇ

Main Topics:

Applied physics

Journal:

European Journal of Science and Technology 2019 Vol. Issue , pp.330-335

Document Type:

Article

Publication Date:

10/2019

Document Language:

Turkish

Document ID (Org No.):

2000919843

Frequency:

Quarterly

eISSN:

2148-2683

Keywords:

Abstract:

 


One of the widely used machine elements in machine design and manufacturing is gears, and in many areas, the use of various sizes of gears is needed. Micro module gears with module 1mm and smaller are used as an important machine element in precision measuring instruments, defense industry and machine manufacturing. Damage to the gear surface, gear teeth, gear body and gear-shaft connection during power transmission affect the normal operation of the entire machine. Any damage that may occur can damage not only the gear or gear connection, but also many machine parts that work with this machine elements. Due to the dimensions of the micro-module gears, the interference-fitting connections come into prominence in the gear-shaft connection. However, there are important shortages in the literature. Designers practicing all interference-fitting connections can lead to both time and economic losses. For this reason, the analytical and numerical calculations are of great importance in the gear hub shaft interference fitting connections.In this study, the stress distributions are calculated and compared numerically and analytically that occur at different interference fit tolerances and different hub diameters for micro module gear having 20 teeth number, 6mm width and 1mm module. The data obtained from the analytical and numerical studies are in agreement with each other. Axial and radial stress decreases as the nominal diameter increases. At this point, however, the weakened gear surface is vulnerable to damage. For all nominal diameter values used in the study, the axial and radial stress magnitude caused by the gear shaft connection are listed as H7/u6, H7/s6, H7/p6, respectively.

.

Article Details

Mikro Modüllü Dişli-Mil Sıkı Geçme Bağlantılarında Mil Çapı ve Delik Toleransının Gerilme Dağılımına Etkisi

Authors:

Tuğçe TEZEL

Publisher:

Osman SAĞDIÇ

Main Topics:

Applied physics

Journal:

European Journal of Science and Technology 2019 Vol. Issue , pp.330-335

Document Type:

Article

Publication Date:

10/2019

Document Language:

Turkish

Document ID (Org No.):

2000919843

Frequency:

Quarterly

eISSN:

2148-2683

mikro modüllü dişli

sıkı geçme

dişli mil bağlantısı

Issues

Article Details

Mikro Modüllü Dişli-Mil Sıkı Geçme Bağlantılarında Mil Çapı ve Delik Toleransının Gerilme Dağılımına Etkisi

Authors: Tuğçe TEZEL

Publisher: Osman SAĞDIÇ

Main Topics: Applied physics

Journal: European Journal of Science and Technology 2019 Vol. Issue , pp.330-335

Document Type: Article

Publication Date: 10/2019

Document Language: Turkish

Document ID (Org No.): 2000919843

Frequency: Quarterly

eISSN: 2148-2683

mikro modüllü dişli

sıkı geçme

dişli mil bağlantısı

Issues

Authors:

Tuğçe TEZEL

Publisher:

Osman SAĞDIÇ

Main Topics:

Applied physics

Journal:

European Journal of Science and Technology 2019 Vol. Issue , pp.330-335

Document Type:

Article

Publication Date:

10/2019

Document Language:

Turkish

Document ID (Org No.):

2000919843

Frequency:

Quarterly

eISSN:

2148-2683