Acceleration Logger and Analyzer

Gizem KAYISOGLU; Seda CANPOLAT; Aysenur Dilara AYDIN; Nehir KUCUKTAS; Metin HUNER

Article Details

Acceleration Logger and Analyzer

Authors:

Gizem KAYISOGLU | Seda CANPOLAT | Aysenur Dilara AYDIN | Nehir KUCUKTAS | Metin HUNER

Main Topics:

Applied physics

Journal:

The Eurasia Proceedings of Science Technology Engineering and Mathematics 2019 Vol.7, pp.9-22

Document Type:

Article

Publication Date:

11/2019

Document Language:

English

Document ID (Org No.):

2000660515

Abstract:

 


In the case of high acceleration values, it is
important to obtain data on the vehicles used by third parties in order to
prevent possible accidents. For this purpose, it is aimed to design an
electronic system which will record the acceleration values of a vehicle during
its journey and then to analyze it. Thanks to the accelerometer sensor placed
in an experimental vehicle, the g force data that the vehicle was exposed to
were obtained and analyzed by Arduino to determine which speeds the drivers
were subjected to during the journey. The final product created in the study is
an electronic device consisting of an Arduino, an accelerometer and an Arduino
SD card reader module. After the physical connection between the elements were
established, the Arduino interface was installed in the computer to obtain the
instantaneous acceleration values in the direction of the acceleration of the
accelerometer. After completing the physical installation of the circuit,
different routes were determined within the scope of determined route in order
to observe the acceleration values for different situations. The axes in each
route obtained were analyzed separately by Matlab and the acceleration values
were plotted. According to the results of the analysis, a maximum of +0.22 /
-0.34 g at the x-axis and +0.26 / -0.25 g at the y-axis and +0.15 / -0.17 g at
the z-axis were encountered during a normal driving. In contrast, in the case
of unsafe use of the same vehicle, the values of +0.41 / -0.63 g on the highest
x-axis, +0.33 / -0.36 g on the y-axis and +0.18 / -0.18 g on the z-axis were
encountered. When the results obtained are shared with the sector and their
view are received, the results of our study have been shown to be supportive of
the data that the companies have already pursued, and have the characteristics
that can meet the needs of the sector.

.

Article Details

Acceleration Logger and Analyzer

Authors: Gizem KAYISOGLU | Seda CANPOLAT | Aysenur Dilara AYDIN | Nehir KUCUKTAS | Metin HUNER

Main Topics: Applied physics

Journal: The Eurasia Proceedings of Science Technology Engineering and Mathematics 2019 Vol.7, pp.9-22

Document Type: Article

Publication Date: 11/2019

Document Language: English

Document ID (Org No.): 2000660515

Issues

Authors:

Gizem KAYISOGLU | Seda CANPOLAT | Aysenur Dilara AYDIN | Nehir KUCUKTAS | Metin HUNER

Main Topics:

Applied physics

Journal:

The Eurasia Proceedings of Science Technology Engineering and Mathematics 2019 Vol.7, pp.9-22

Document Type:

Article

Publication Date:

11/2019

Document Language:

English

Document ID (Org No.):

2000660515