Simulation and Power Flow Control Using Switching’s Method of Isolated Wind-Solar Hybrid Power Generation System with Battery Storage

Emrah OGUZ; Hasan ÇİMEN; Yüksel OĞUZ

doi:https://doi.org/10.17694/bajece.334348

Article Details

Simulation and Power Flow Control Using Switching’s Method of Isolated Wind-Solar Hybrid Power Generation System with Battery Storage

Authors:

Emrah OGUZ | Hasan ÇİMEN | Yüksel OĞUZ

Publisher:

Balkan Yayın

Journal:

Balkan Journal of Electrical and Computer Engineering 2017 Vol.5 Issue 2, pp.40-49

Document Type:

Article

Publication Date:

8/2017

Document Language:

Turkish

Document ID (Org No.):

2000927502

Frequency:

Quarterly

pISSN:

2147-284X

DOI:

https://doi.org/10.17694/bajece.334348

Abstract:

 


In this paper, a battery-supported hybrid wind-solar energy generation
system with switching power flow control is presented to supply stable
electrical power to two laboratories at the Electric & Electronic
Engineering Department. For this
purpose, 600W 3-phase permanent magnet synchronous generator (PMSG) based on
the wind power generation system (WPGS) and the solar power generation system
(SPGS) consisting of 190W 3 pieces mono crystal solar panel were combined to
build a 1170W hybrid wind-solar power generation system (HWSPGS). The solar and wind power generation systems were used as the main
energy sources while 100 Ah 12V 6
pieces gel jeep cycle accumulator groups were used as
the energy storage device to ensure
continuity of energy. Also dynamic modeling and switching power flow control
of the battery supported the HWSPGS were performed using Matlab/Simulink in this
study. Determining the switching positions of the
charge control unit according to loading and battery charge situations of the
HWSPGS, power flow control between the generation unit and consumer was made in
planned manner. When the curves of electrical magnitudes obtained from
simulation results were examined, it was determined that no big difference
existed in electrical and mechanical magnitudes in parallel to dynamic behavior
of the installed hybrid power generation system.

.

Article Details

Simulation and Power Flow Control Using Switching’s Method of Isolated Wind-Solar Hybrid Power Generation System with Battery Storage

Authors: Emrah OGUZ | Hasan ÇİMEN | Yüksel OĞUZ

Publisher: Balkan Yayın

Journal: Balkan Journal of Electrical and Computer Engineering 2017 Vol.5 Issue 2, pp.40-49

Document Type: Article

Publication Date: 8/2017

Document Language: Turkish

Document ID (Org No.): 2000927502

Frequency: Quarterly

pISSN: 2147-284X

DOI: https://doi.org/10.17694/bajece.334348

Issues

Authors:

Emrah OGUZ | Hasan ÇİMEN | Yüksel OĞUZ

Publisher:

Balkan Yayın

Journal:

Balkan Journal of Electrical and Computer Engineering 2017 Vol.5 Issue 2, pp.40-49

Document Type:

Article

Publication Date:

8/2017

Document Language:

Turkish

Document ID (Org No.):

2000927502

Frequency:

Quarterly

pISSN:

2147-284X

DOI:

https://doi.org/10.17694/bajece.334348