Mathematical and experimental study of the direct contact membrane distillation method for desalination using a hydrophobic electrospun nanofibers membrane

Nawras N. Safi; Basma I. Waisi

doi:10.31699/IJCPE.2024.4.12

Article Details

Mathematical and experimental study of the direct contact membrane distillation method for desalination using a hydrophobic electrospun nanofibers membrane

Authors:

Nawras N. Safi | Basma I. Waisi

Publisher:

University of Baghdad

Journal:

Iraqi Journal of Chemical and Petroleum Engineering Vol.25 Issue 4, pp.123-137

Document Type:

Article

Publication Date:

12/2024

Document Language:

English

Document ID (Org No.):

2001368446

pISSN:

2618-0707

DOI:

10.31699/IJCPE.2024.4.12

Keywords:

Abstract:

 This paper examines the performance of a Direct Contact Membrane Distillation (DCMD) system experimentally and theoretically. The system uses a super hydrophobic electrospun nanofiber membrane to desalinate water. Investigations were carried out into how the feed concentration, feed flow rate, and feed temperature affected permeate flux. as system operating parameters to aid in comprehending the factors impacting the DCMD process. The application of DOE and Taguchi methods achieved statistical optimization of the DCMD process's performance. In addition, the study of mass and heat transport in DCMD was described by a theoretical model. While the feed concentration (0- 210 g/L) significantly affected flux, the feed's temperature (35-55 °C) and flow rate (0.2-0.6 L/min) mostly dominated the impact on system performance. The created model numerically solved the DCMD process using MATLAB software, describing it as a system of nonlinear equations. Various operating conditions were used to investigate the efficiency of the superhydrophobic electrospun nanofiber membrane in treating 210 g/L NaCl salt water. Changing the feed temperature and concentration affected the hypothetically suggested path across the membrane, according to the simulation results presented in this paper. Excellent agreement was observed between the experiment results and the constructed model's predicted results. Every instance maintained a high salt rejection rate (over 99.9%). The DCMD produced a gain output ratio (GOR) of 0.87 and a temperature polarization coefficient of 0.78 to 0.91. The system achieved a maximum thermal efficiency of 73.5%. The optimal parameters, which are 70 g/L, 0.6 L/min, and 55°C.

Article Details

Mathematical and experimental study of the direct contact membrane distillation method for desalination using a hydrophobic electrospun nanofibers membrane

Authors:

Nawras N. Safi | Basma I. Waisi

Publisher:

University of Baghdad

Journal:

Iraqi Journal of Chemical and Petroleum Engineering Vol.25 Issue 4, pp.123-137

Document Type:

Article

Publication Date:

12/2024

Document Language:

English

Document ID (Org No.):

2001368446

pISSN:

2618-0707

DOI:

10.31699/IJCPE.2024.4.12

Modelling and Simulation

Super Hydrophobic Nanofiber Membrane

Membrane Distillation

Issues

Article Details

Mathematical and experimental study of the direct contact membrane distillation method for desalination using a hydrophobic electrospun nanofibers membrane

Authors: Nawras N. Safi | Basma I. Waisi

Publisher: University of Baghdad

Journal: Iraqi Journal of Chemical and Petroleum Engineering Vol.25 Issue 4, pp.123-137

Document Type: Article

Publication Date: 12/2024

Document Language: English

Document ID (Org No.): 2001368446

pISSN: 2618-0707

DOI: 10.31699/IJCPE.2024.4.12

Modelling and Simulation

Super Hydrophobic Nanofiber Membrane

Membrane Distillation

Issues

Authors:

Nawras N. Safi | Basma I. Waisi

Publisher:

University of Baghdad

Journal:

Iraqi Journal of Chemical and Petroleum Engineering Vol.25 Issue 4, pp.123-137

Document Type:

Article

Publication Date:

12/2024

Document Language:

English

Document ID (Org No.):

2001368446

pISSN:

2618-0707

DOI:

10.31699/IJCPE.2024.4.12