Comparison of Simplified Drilling Method and Conventional Drilling Method for Dental Implant Site Preparation

Zeynep Dilan Orhan; Levent Ciğerim; Mohammad Alsmadı

Article Details

Comparison of Simplified Drilling Method and Conventional Drilling Method for Dental Implant Site Preparation

Authors:

Zeynep Dilan Orhan | Levent Ciğerim | Mohammad Alsmadı

Publisher:

Van Yuzuncu Yıl University

Main Topics:

Ağız ve Çene Cerrahisi | Oral İmplantoloji

Journal:

Van Diş Hekimliği Dergisi Vol.4 Issue 1, pp.22-29

Document Type:

Article

Publication Date:

7/2023

Document Language:

Turkish

Document ID (Org No.):

2001296755

pISSN:

2757-6868

Keywords:

Abstract:

 The aim of this study was to compare two different drilling protocols used for dental implant socket preparation on the topic of implant stability and preparation time. On dental implant surgery specific mandibular artificial bone models, simplified drilling using only pilot drill and final drill in one group and conventional drilling using all drills of increasing diameters, including pilot drill and final drill in the other group was used. The length of the implant in the socket which placed under constant torque and the preparation times of the sockets were noted. According to the data obtained, there was no difference between the two groups in terms of implant stability, but it was observed that the sockets using the simplified drilling protocol were prepared in a longer time than the conventional drilling.

 The aim of this study was to compare two different drilling protocols used for dental implant socket preparation on the topic of implant stability and preparation time. On dental implant surgery specific mandibular artificial bone models, simplified drilling using only pilot drill and final drill in one group and conventional drilling using all drills of increasing diameters, including pilot drill and final drill in the other group was used. The length of the implant in the socket which placed under constant torque and the preparation times of the sockets were noted. According to the data obtained, there was no difference between the two groups in terms of implant stability, but it was observed that the sockets using the simplified drilling protocol were prepared in a longer time than the conventional drilling.

 The aim of this study was to compare two different drilling protocols used for dental implant socket preparation on the topic of implant stability and preparation time. On dental implant surgery specific mandibular artificial bone models, simplified drilling using only pilot drill and final drill in one group and conventional drilling using all drills of increasing diameters, including pilot drill and final drill in the other group was used. The length of the implant in the socket which placed under constant torque and the preparation times of the sockets were noted. According to the data obtained, there was no difference between the two groups in terms of implant stability, but it was observed that the sockets using the simplified drilling protocol were prepared in a longer time than the conventional drilling.

 Bu çalışmanın amacı, dental implant yuvasının hazırlığı için kullanılan iki farklı frezleme protokolünün implant stabilitesi ve preparasyon süresi açısından karşılaştırılmasıydı. Dental implant cerrahisine özel alt çene yapay kemik modelleri üzerinde, bir grupta basitleştirilmiş yalnızca pilot frez ve final frezin kullanıldığı frezleme, diğer grupta ise geleneksel pilot frez ve final frez de dahil olmak üzere artan çaplarda tüm frezlerin kullanıldığı frezleme yapılmış, sabit tork altında yerleştirilen implantın yuva içerisindeki uzunluğu ve yuvaların açılma süreleri not alınmıştır. Elde edilen verilere göre, her iki grup arasında implant stabiliteleri açısından fark görülmezken, basitleştirilmiş frezleme protokolü kullanılan yuvaların geleneksel frezlemeye göre daha uzun sürede hazırlandığı görülmüştür.

Article Details

Comparison of Simplified Drilling Method and Conventional Drilling Method for Dental Implant Site Preparation

Authors:

Zeynep Dilan Orhan | Levent Ciğerim | Mohammad Alsmadı

Publisher:

Van Yuzuncu Yıl University

Main Topics:

Ağız ve Çene Cerrahisi | Oral İmplantoloji

Journal:

Van Diş Hekimliği Dergisi Vol.4 Issue 1, pp.22-29

Document Type:

Article

Publication Date:

7/2023

Document Language:

Turkish

Document ID (Org No.):

2001296755

pISSN:

2757-6868

Dental implant

drilling

stabilityDental implant

frezleme

stabilite

Issues

Article Details

Comparison of Simplified Drilling Method and Conventional Drilling Method for Dental Implant Site Preparation

Authors: Zeynep Dilan Orhan | Levent Ciğerim | Mohammad Alsmadı

Publisher: Van Yuzuncu Yıl University

Main Topics: Ağız ve Çene Cerrahisi | Oral İmplantoloji

Journal: Van Diş Hekimliği Dergisi Vol.4 Issue 1, pp.22-29

Document Type: Article

Publication Date: 7/2023

Document Language: Turkish

Document ID (Org No.): 2001296755

pISSN: 2757-6868

Dental implant

drilling

stabilityDental implant

frezleme

stabilite

Issues

Authors:

Zeynep Dilan Orhan | Levent Ciğerim | Mohammad Alsmadı

Publisher:

Van Yuzuncu Yıl University

Main Topics:

Ağız ve Çene Cerrahisi | Oral İmplantoloji

Journal:

Van Diş Hekimliği Dergisi Vol.4 Issue 1, pp.22-29

Document Type:

Article

Publication Date:

7/2023

Document Language:

Turkish

Document ID (Org No.):

2001296755

pISSN:

2757-6868