Investigation of the physical properties of clay bricks with waste marble powder additive

Lina İsrail; Kemal Köseoğlu

Article Details

Investigation of the physical properties of clay bricks with waste marble powder additive

Authors:

Lina İsrail | Kemal Köseoğlu

Publisher:

Gumushane University

Main Topics:

Mühendislik

Journal:

Gümüşhane Üniversitesi Fen Bilimleri Dergisi Vol.13 Issue 2, pp.314-321

Document Type:

Article

Publication Date:

4/2023

Document Language:

Turkish

Document ID (Org No.):

2001287764

pISSN:

2146-538X

Keywords:

Abstract:

 Reusing or recycling of wastes is an important issue that needs to be considered painstakingly. In this study, marble dust, characterized as a by-product of marble mining, was evaluated by adding it to clay bricks. Three different industrial firing regimes with sintering temperatures of 950, 1113, and 1185C were applied to the clay bricks prepared. The compliance of the bricks with national and international standards was investigated by physical tests such as linear firing shrinkage percentage, firing strength, water absorption percentage, and color. It was seen that the most appropriate contribution rate was 20. The firing shrinkage changed between 0.06 and 2.4 while firing strength was a minimum of 6 MPa and maximum of 37 MPa and finally, water absorption percentage varied between 13-20. A decrease in red and yellow color values was observed with the increase in temperature. The study is thought to be of great importance in terms of less usage of natural clay resources and reuse of wastes.

 Reusing or recycling of wastes is an important issue that needs to be considered painstakingly. In this study, marble dust, characterized as a by-product of marble mining, was evaluated by adding it to clay bricks. Three different industrial firing regimes with sintering temperatures of 950, 1113, and 1185C were applied to the clay bricks prepared. The compliance of the bricks with national and international standards was investigated by physical tests such as linear firing shrinkage percentage, firing strength, water absorption percentage, and color. It was seen that the most appropriate contribution rate was 20. The firing shrinkage changed between 0.06 and 2.4 while firing strength was a minimum of 6 MPa and maximum of 37 MPa and finally, water absorption percentage varied between 13-20. A decrease in red and yellow color values was observed with the increase in temperature. The study is thought to be of great importance in terms of less usage of natural clay resources and reuse of wastes.

 Reusing or recycling of wastes is an important issue that needs to be considered painstakingly. In this study, marble dust, characterized as a by-product of marble mining, was evaluated by adding it to clay bricks. Three different industrial firing regimes with sintering temperatures of 950, 1113, and 1185C were applied to the clay bricks prepared. The compliance of the bricks with national and international standards was investigated by physical tests such as linear firing shrinkage percentage, firing strength, water absorption percentage, and color. It was seen that the most appropriate contribution rate was 20. The firing shrinkage changed between 0.06 and 2.4 while firing strength was a minimum of 6 MPa and maximum of 37 MPa and finally, water absorption percentage varied between 13-20. A decrease in red and yellow color values was observed with the increase in temperature. The study is thought to be of great importance in terms of less usage of natural clay resources and reuse of wastes.

 Atıkların yeniden kullanılması ya da geri dönüştürülmesi üzerinde titizlikle durulması gereken önemli bir konudur. Bu çalışmada mermer madenciliğinde yan ürün olarak nitelendirilen mermer tozu kil tuğlalara katılarak değerlendirilmiştir. Hazırlanan tuğlalara sinterleşme sıcaklığı 950o, 1113o ve 1185o C olan üç farklı endüstriyel pişirim rejimi uygulanmıştır. Doğrusal pişme küçülmesi, pişme mukavemeti, su emme ve renk gibi fiziksel testler ile tuğlaların ulusal ve uluslararası standartlara uygunluğu araştırılmıştır. En uygun katkı oranının 20 olduğu görülmüştür. Pişme küçülmesinin 0,06 ile 2,4 arasında değiştiği, pişme mukavemet değerinin en düşük 6 MPa en yüksek yaklaşık 37 MPa olduğu ve su emme değerinin ise 13 ile 20 aralığında kaldığı tespit edilmiştir. Sıcaklık artışı ile kırmızı ve sarı renk değerlerinde azalma görülmüştür. Çalışmanın doğal kil kaynakların daha az kullanımı ve atıkların değerlendirilmesi açısından büyük önem taşıdığı düşünülmektedir.

Article Details

Investigation of the physical properties of clay bricks with waste marble powder additive

Authors:

Lina İsrail | Kemal Köseoğlu

Publisher:

Gumushane University

Main Topics:

Mühendislik

Journal:

Gümüşhane Üniversitesi Fen Bilimleri Dergisi Vol.13 Issue 2, pp.314-321

Document Type:

Article

Publication Date:

4/2023

Document Language:

Turkish

Document ID (Org No.):

2001287764

pISSN:

2146-538X

Waste marble powder

Physical properties

Clay bricksAtık mermer tozu

Fiziksel özellikler

Kil tuğlalar

Issues

Article Details

Investigation of the physical properties of clay bricks with waste marble powder additive

Authors: Lina İsrail | Kemal Köseoğlu

Publisher: Gumushane University

Main Topics: Mühendislik

Journal: Gümüşhane Üniversitesi Fen Bilimleri Dergisi Vol.13 Issue 2, pp.314-321

Document Type: Article

Publication Date: 4/2023

Document Language: Turkish

Document ID (Org No.): 2001287764

pISSN: 2146-538X

Waste marble powder

Physical properties

Clay bricksAtık mermer tozu

Fiziksel özellikler

Kil tuğlalar

Issues

Authors:

Lina İsrail | Kemal Köseoğlu

Publisher:

Gumushane University

Main Topics:

Mühendislik

Journal:

Gümüşhane Üniversitesi Fen Bilimleri Dergisi Vol.13 Issue 2, pp.314-321

Document Type:

Article

Publication Date:

4/2023

Document Language:

Turkish

Document ID (Org No.):

2001287764

pISSN:

2146-538X