USE OF MARBLE WASTE AS AGGREGATE IN PAVEMENT STONE PRODUCTION

Ayşe Büyükünsal; Bilgen Akkuş

Article Details

USE OF MARBLE WASTE AS AGGREGATE IN PAVEMENT STONE PRODUCTION

Authors:

Ayşe Büyükünsal | Bilgen Akkuş

Publisher:

Süleyman Demirel University

Main Topics:

Yapı Malzemeleri

Journal:

Mühendislik Bilimleri ve Tasarım Dergisi Vol.12 Issue 1, pp.241-254

Document Type:

Article

Publication Date:

3/2024

Document Language:

Turkish

Document ID (Org No.):

2001313929

pISSN:

1308-6693

Keywords:

Abstract:

 In this study, it is aimed to re-functionalize waste marbles by using them as aggregate in concrete interlocking paving stones and to ensure the sustainability of these wastes by managing them. A total of 80 samples were prepared in five different mixture ratios. Half of the samples were kept in salt water and half in normal water to allow them to set. Water absorption rate determination, abrasion resistance and splitting tensile strength tests were applied to concrete paving stone samples. Compressive strength tests were performed on cube samples. It has been observed that the test data for determining water absorption rate, compressive strength and abrasion resistance are within the standards. When the results of the splitting tensile strength test are examined, it is seen that the samples containing 20, 40 and 60 marble aggregate have sufficient strength; However, it was observed that the strength of the samples prepared at 80 and 100 was insufficient. As a result, it has been determined that up to 60 of waste marble can be used as aggregate in concrete paving stones.

 In this study, it is aimed to re-functionalize waste marbles by using them as aggregate in concrete interlocking paving stones and to ensure the sustainability of these wastes by managing them. A total of 80 samples were prepared in five different mixture ratios. Half of the samples were kept in salt water and half in normal water to allow them to set. Water absorption rate determination, abrasion resistance and splitting tensile strength tests were applied to concrete paving stone samples. Compressive strength tests were performed on cube samples. It has been observed that the test data for determining water absorption rate, compressive strength and abrasion resistance are within the standards. When the results of the splitting tensile strength test are examined, it is seen that the samples containing 20, 40 and 60 marble aggregate have sufficient strength; However, it was observed that the strength of the samples prepared at 80 and 100 was insufficient. As a result, it has been determined that up to 60 of waste marble can be used as aggregate in concrete paving stones.

 In this study, it is aimed to re-functionalize waste marbles by using them as aggregate in concrete interlocking paving stones and to ensure the sustainability of these wastes by managing them. A total of 80 samples were prepared in five different mixture ratios. Half of the samples were kept in salt water and half in normal water to allow them to set. Water absorption rate determination, abrasion resistance and splitting tensile strength tests were applied to concrete paving stone samples. Compressive strength tests were performed on cube samples. It has been observed that the test data for determining water absorption rate, compressive strength and abrasion resistance are within the standards. When the results of the splitting tensile strength test are examined, it is seen that the samples containing 20, 40 and 60 marble aggregate have sufficient strength; However, it was observed that the strength of the samples prepared at 80 and 100 was insufficient. As a result, it has been determined that up to 60 of waste marble can be used as aggregate in concrete paving stones.

 Bu çalışmada atık mermerlerin, beton kilitli parke taşlarında agrega olarak kullanılması yöntemi ile yeniden işlevsel hale getirilmesi, kısmen de olsa bu atıkların yönetilerek sürdürülebilirliğinin sağlanması hedeflenmiştir. Deneyler sırasında ilgili TSE Standartları ve Karayolları Teknik Şartnamesinden faydalanılmıştır. Beş farklı 20 40, 60 , 80 ve 100 karışım oranında toplamda 60 adet beton parke taşı ve buna ilave olarak 20 adet bir kenarı 10 cm olan küp numuneler hazırlanmıştır. Numunelerin yarısı tuzlu suda yarısı da normal suda bekletilerek priz aldırılmıştır. Beton parke taşı numunelerine su emme oranını belirleme, aşınma direnci, yarmada çekme dayanımı deneyleri uygulanmıştır. Küp numunelere ise basınç dayanımı deneyi yapılmıştır. Su emme oranını belirleme, basınç dayanımı, aşınma direnci deney verilerinin standartların içerisinde kaldığı görülmüştür. Yarmada çekme dayanımı deneyinin sonuçları incelendiğinde ise 20, 40 ve 60 oranında mermer agregası bulunan numunelerin yeterli dayanıma haiz olduğu; ancak 80 ve 100 oranında hazırlanan numunelerin ise dayanımının yetersiz olduğu görülmüştür. Sonuç olarak beton parke taşlarında atık mermerlerin agrega olarak 60 oranına kadar kullanılabileceği tespit edilmiştir.

Article Details

USE OF MARBLE WASTE AS AGGREGATE IN PAVEMENT STONE PRODUCTION

Authors:

Ayşe Büyükünsal | Bilgen Akkuş

Publisher:

Süleyman Demirel University

Main Topics:

Yapı Malzemeleri

Journal:

Mühendislik Bilimleri ve Tasarım Dergisi Vol.12 Issue 1, pp.241-254

Document Type:

Article

Publication Date:

3/2024

Document Language:

Turkish

Document ID (Org No.):

2001313929

pISSN:

1308-6693

Marble Waste

Concrete Paving

SustainabilityMermer Atık

Beton Parke

Sürdürülebilirlik

Issues

Article Details

USE OF MARBLE WASTE AS AGGREGATE IN PAVEMENT STONE PRODUCTION

Authors: Ayşe Büyükünsal | Bilgen Akkuş

Publisher: Süleyman Demirel University

Main Topics: Yapı Malzemeleri

Journal: Mühendislik Bilimleri ve Tasarım Dergisi Vol.12 Issue 1, pp.241-254

Document Type: Article

Publication Date: 3/2024

Document Language: Turkish

Document ID (Org No.): 2001313929

pISSN: 1308-6693

Marble Waste

Concrete Paving

SustainabilityMermer Atık

Beton Parke

Sürdürülebilirlik

Issues

Authors:

Ayşe Büyükünsal | Bilgen Akkuş

Publisher:

Süleyman Demirel University

Main Topics:

Yapı Malzemeleri

Journal:

Mühendislik Bilimleri ve Tasarım Dergisi Vol.12 Issue 1, pp.241-254

Document Type:

Article

Publication Date:

3/2024

Document Language:

Turkish

Document ID (Org No.):

2001313929

pISSN:

1308-6693