DESIGN OF A PERCOLATOR FOR AQUA-AMMONIA LIQUID

Mikdam M. Saleh; Ali S. Baqir

doi:10.31026/j.eng.2005.01.05

Article Details

DESIGN OF A PERCOLATOR FOR AQUA-AMMONIA LIQUID

Authors:

Mikdam M. Saleh | Ali S. Baqir

Publisher:

University of Baghdad

Journal:

Journal of Engineering Vol.11 Issue 1, pp.33-49

Document Type:

Article

Publication Date:

1/2005

Document Language:

English

Document ID (Org No.):

2001379835

pISSN:

2520-3339

DOI:

10.31026/j.eng.2005.01.05

Abstract:

 A new design concept for a percolator is developed which combine the simultaneous production of ammonia vapor plus the pumping of weak aqua ammonia liquid. The steady state desig was based on a balance between the hydrostatic driving head and the total single and two-phase pressure losses in the percolator system. To accomplish this, the results from modeling of the driving pressure and pressure losses, using the separated flow and drift flux methods were compared with the experimental measurements. The Chisholm's model was the best in predicting the measured flow rate versus water level for first stage with a maximum standard deviation of ± 10.1% and was adopted for the theoretical calculations. Parametric design studies that include the cooling power and the strong solution level, inner tube diameter and height for each stage of the percolator were carried out to maximize suitable cost function. The results of the optimization gave a two stage percolator of length 280 mm, inner diameter 5.5 mm for first stage and length 520 mm, inner diameter 5.5 mm for second stage.

Article Details

DESIGN OF A PERCOLATOR FOR AQUA-AMMONIA LIQUID

Authors: Mikdam M. Saleh | Ali S. Baqir

Publisher: University of Baghdad

Journal: Journal of Engineering Vol.11 Issue 1, pp.33-49

Document Type: Article

Publication Date: 1/2005

Document Language: English

Document ID (Org No.): 2001379835

pISSN: 2520-3339

DOI: 10.31026/j.eng.2005.01.05

Issues

Authors:

Mikdam M. Saleh | Ali S. Baqir

Publisher:

University of Baghdad

Journal:

Journal of Engineering Vol.11 Issue 1, pp.33-49

Document Type:

Article

Publication Date:

1/2005

Document Language:

English

Document ID (Org No.):

2001379835

pISSN:

2520-3339

DOI:

10.31026/j.eng.2005.01.05